Volatiles from Thin Film Degradation of Bio-based, Synthetic and Mineral...
AbstractPurpose - Workmanship concerns lead to more focus on volatile materials, released by industrial lubricants. Typically, flash point test and thermo-gravimetrical analysis (TGA) are used to...
View ArticleTribological properties of crown-type phosphate ionic liquid as additive in...
AbstractPurpose - The aim of this paper is to design the crown-type phosphate ionic liquid additive which can dissolve in poly(ethylene glycol) (shorten for PEG) completely, and evaluate the...
View ArticleDesign of a Fuzzy Model Based on Vibration Signal Analysis to Auto-detect the...
AbstractPurpose - This research is carried out to detect gears faults with an automatic decision making process and find a reliable method to detect faults on gear systems using a composition of...
View ArticleThe Effect of Extreme Pressure Added Vegetable Based Cutting Fluids on...
AbstractPurpose - In this study, the performances of vegetable based cutting fluids were investigated by comparing tool life, surface roughness and cutting force during end milling of AISI 304...
View ArticleOptimize Aluminum’s Surface Roughness in Rolling Lubrication Process
AbstractPurpose - In this paper, a comprehensive experimental study is conducted to achieve optimal surface roughness of aluminum rolled with freshly roller of two-high rolling mills....
View ArticleWear behaviour of Aluminium/Alumina/Graphite hybrid metal matrix composites...
AbstractPurpose - Recent advances in modern technology have generated the need to develop newer materials for better antifriction and wear properties. The objective is to analyse the significance of...
View ArticleAnalysis of Fluorinated Interactions in Plain ZDDP and Fully Formulated Oils...
AbstractPurpose - In this study, very reproducible boundary lubrication tests were conducted as part of Design of Experiment (DOE) to study the behavior of fluorinated catalyst mixed with...
View ArticleSynergistic lubrication of MoS2 particles with different morphologies in...
AbstractPurpose - The aim of this paper is to explore the synergistic lubrication of MoS2 particles with different morphologies.Design/methodology/approach - The synergistic lubrication of MoS2...
View ArticleStudy on variation of tribo-performance of commercial engine oils.
AbstractPurpose - To study the performance variability of commercially available engine oils based on Physico-chemical and Tribological performance parameters. Design/methodology/approach - By...
View ArticleStatic performance characteristics of hybrid journal bearings with plugged...
AbstractPurpose - This paper investigates the effect of plugging of holes on the static performance characteristics of a constant flow valve compensated hole-entry hybrid journal bearing system...
View ArticleEffects of non-Newtonian Rabinowitsch fluids in wide parallel rectangular...
AbstractPurpose - In the present paper, we analyze the non-Newtonian effects of Rabinowitsch fluids on the squeeze film performances between wide parallel rectangular plates.Design/methodology/approach...
View ArticleThe tribological behaviour of Fe-C-Al cast iron – Effect of temperature
AbstractPurpose - The aim of this paper is to study the tribological behaviour of Fe-C-Al cast iron at different temperatures using universal pin-on-disk machine. Design/methodology/approach - The cold...
View ArticlePattern recognition based surface roughness prediction in turning Hybrid...
AbstractPurpose - Surface roughness prediction using pattern recognition for the Aluminium Hybrid Metal Matrix Composite (HMMC).Design/methodology/approach - Hybrid composites were manufactured using...
View ArticleFriction heat conduction and entransy of friction lining
AbstractPurpose - This paper aims to analyze the friction heat conduction and entransy of two friction linings in the high-speed slide accident of a mine friction hoist.Design/methodology/approach -...
View ArticleMeasurement of Oil Film Thickness between Piston Ring and Liner Using Strain...
AbstractPurpose - The aim of this paper is to develop a technique to measure the oil film thickness between piston ring and liner throughout the stroke, without impairing the surface properties of the...
View ArticleMaterials flow for different lubricants during cold forming
AbstractPurpose - Barreling contour variations on the free surfaces of cylindrical upset specimen are to handle measuring for different upsetting reductions and different lubrication conditions in this...
View ArticleA Comparison of Two Minimum Quantity Lubrication Delivery Systems
AbstractPurpose - Compare the performance of single and dual-channel MQL for reaming spool bores in an automotive transmission valve body. Design/methodology/approach - Machining experiments are...
View ArticlePreparation and tribological properties of surface-modified calcium borate...
AbstractPurpose - To develop a potential substitute for conventional lubricant additive and improve the oil-solubility of nanoparticles, calcium borate nanoparticles modified by an eco-friendly or...
View ArticleAntifriction Property of Surface Patterning Nano-hard film on the...
AbstractPurpose - There types of pattern on the monocrystalline silicon surface were prepared by using laser surface processing equipment. The DLC film and Si-DLC film on the patterning surface were...
View ArticleChemical mechanical polishing of steel substrate using aluminum nanoparticles...
AbstractPurpose - Chemical mechanical polishing (CMP) has attracted much attention recently because of its importance as a nano-scale finishing process for high value-added large components which are...
View Article
